2018-2019 Horticultural Catalog

BCS
Tractor-Tiller
The most popular two-wheel tractor. BCS tractors are built for decades of dependable service, outperforming and outlasting all brands of singlepurpose,
belt-driven, walk-behind equipment. Built to the same commercial standards as four-wheel farm tractors, BCS tackles the jobs that
don’t suit four-wheel tractors: mowing slopes, maneuvering in small areas, intensive cultivation, sweeping walkways, and much more!
BCS Tractor Features:
• Operator presence control on the left handlebar that keeps the tractor running. This assures a safe working condition for the operator and can
be done with only one hand!
• Perhaps BCS’s most distinct and unique feature is the simplicity of 180 degree rotating the handlebars, which allows you to easily transform
your walk-behind tiller into a mower-ready machine
• Quick-Reverse allows instant reverse with a shuttle-type gear shifter for easier maneuvering and handling
• Anti-vibration adjustable handlebars are comfortable, easy to use, and extremely versatile with six vertical height settings and
side-to-side adjusting
• All gear drive is heat-treated and hardened steel shafts and gears, supported by ball bearings in oil bath. This not only provides extra
durability, but enhances the machine’s performance by minimizing the loss of engine output during the transfer of power
• Engineered with a low center of gravity for better stability and precise machine balance with all appropriate attachments
• Independent Power Take Off (PTO) which allows attachments to be turned on and off independently of the tractor wheels
• Power safe models allow you to use maximum power for the attachments with the safety of the hydraulic clutch immediately stopping the
power to the PTO without shutting off the engine when safety lever is released
***Note: Tillers and other attachments are not included with the tractor and must be purchased separately - See next page
710 722
749
For tiller
attachments see the
next page.
718 739
BCS tractor tillers
SHIPPED FOB: Oregon
Truck ship only
Recoil
POWER SAFE MODELS
Features 710 Recoil 718 Recoil 722 Recoil 739 Recoil 749 Recoil
Engine: SP170 GX200 GX240 GX340 GX390
Transmission Type Gear Drive Gear Drive Gear Drive Gear Drive Gear Drive
Clutch Type Cone Clutch Cone Clutch Cone Clutch Hydraulic Hydraulic
Differential No No No Yes Yes
Number of Speed Rear/Front Rear/Front Rear/Front Rear/Front Rear/Front
Tilling Mode 3/2 .6, 1.4 & 6.8 mph 3/2 .6, 1.4 & 6.8 mph 3/2 .6, 1.4 & 6.8 mph 3/3 .78, 1.81 & 2.67 mph 3/3 .78, 1.81 & 2.67 mph
Mowing Mode 2/2 .6 & 1/4 mph 2/2 .6 & 1/4 mph 2/2 .6 & 1/4 mph 3/3 .83, 1.91 & 2.81 mph 3/3 .83, 1.91 & 2.81 mph
Weight w/ 26” Tiller 213 lbs 210 lbs 275 lbs 289 lbs 342 lbs
Standard Wheel Size 16” x 4” x 8” 16” x 4” x 8” 18” x 4” x 10” 19” x 5” x 10” 19” x 5 “ x 10”
Wheelbase 16” 16” 16” 22” 22”
Tilling Width 18” 18” 20” or 26” 26” or 30” 26” or 30”
Reverse Tiller Lockout Yes Yes Yes Yes Yes
Adjustable Handles:
Side to Side Instant Instant Instant Instant Instant
Up and Down Instant Instant Instant Instant Instant
Reverse Engagement Quick Quick Quick Quick Quick
Parking Brake No No No Yes Yes
Catalog Number 40-97600 40-97040 40-97110 40-97060 40-97070
Each $ 1,630.00 $ 2,330.00 $ 2,680.00 $ 3,450.00 $ 4,280.00
800-325-3055
www.hummert.com
621