2018-2019 Horticultural Catalog

Aluminet ® Shade Cloth
Aluminet® - the Next Step in Shade Cloth
Aluminet® is a highly reflective, metalized HDPE knitted screen covered
with a special anti-oxidation coating.
Aluminet® provides maximum radiation reflection on both sides,
night and day. It can reduce heat inside structures and help effective
heat preservation under the screen. The fabric increases light and
evens out irradiation transfer in the range from UV to far IR.
Aluminet® can provide energy savings from 12-36% depending
upon percentage of shade.
• Rated for outside with UV resistance for
approximately 4 years
• Reflects and diffuses sunlight
• Helps plants stay cooler and saves energy
• Anti-oxidation coating
• Reduces wind speed
• Resists rips, tears and frays
• Standard width: 9.85’, 13.1’, 19.8’, 26.2’
Aluminet ® shade cloth
30% 50% 70%
Price per sq foot
Percentage Hole Diffused Energy Catalog 100- 1000- 5000 &
Description of Shade Size Reflection Light Saving Weight Number 999 4999 Up
Aluminet 30% 30-35% 6 x 8 mm 30% 79% 12% 1.5 oz/yd 2 27-80700 $ 0.41 $ 0.36 $ 0.33
Aluminet 50% 50-55% 3 x 6 mm 50% 60% 15% 2.24 oz/yd 2 27-80650 0.45 0.40 0.36
Aluminet 70% 70-74% 2 x 3 mm 70% 44% 36% 2.74 oz/yd 2 27-80670 0.57 0.50 0.46
Aluminet Fabrication Charges
When seaming or taping, always allow 4% more in length.
SHIPPED FOB: Georgia
Catalog
Description Price per Number Each
Edge taping linear foot 27-80720 $ 0.41
#2 Grommets each 27-80100 0.24
Hemming linear foot 27-80740 0.41
Seaming linear foot 27-80760 0.41
Slitting linear foot 27-80780 0.41
CUSTOM SEWING & FABRICATION CHARGES EXPLAINED
EDGE TAPING – Custom sewn around the perimeter of the panel
with 2-3/4” polypropylene tape folded over edges and double
stitched. This prevents unraveling and must be ordered for
grommet installation.
GROMMETS – #2 5/6” grommets, spaced to your specifications.
HEM EDGES – Fabric edges are folded back and sewn to create
hem pockets which will accommodate a 1” or 2”OD pipe
insertion. Price per linear foot of edge. Hemmed edges cannot
be used with grommets. This should only be used if suspended
on wires indoors or a situation where there is no wind.
SEAMING – This is necessary whenever two or more panels
are sewn together to create a customized size. All seams
strengthened with 2-3/4” reinforcement webbing tape.
SLITTING –Should it be necessary to fabricate from a standard size
fabric to custom width, a slitting charge per total linear footage
will be added.
RE-ROLL – Should a customer require fabric in rolls, this charge
would be applied to total square feet of order. Maximum roll
width 16’.
Please note: All special order/cut to length items are not returnable
Edge Taping Grommeting Hemming Seaming Slitting
496 800-325-3055
www.hummert.com