2018-2019 Horticultural Catalog

“Designed for greenhouses, schools, universities,
restaurants, research facilities, nurseries, market
growers, and seed companies”
Germination Chamber
Made in the
USA
The Phytotronics Germination Chamber was designed by horticulturalists for horticulturalists. It incorporates many
great features not available anywhere else; such as the door gutter collects condensation and redirects it back
into the chamber to avoid puddles on the floor, low water level switch protects heating element, and the optional
temperature settable ventilation fans move air through the chamber to avoid overheating.
Features
• Stainless steel and aluminum construction
• Doors on both sides swing fully open on piano hinges to allow
complete access to interior
• Clear polycarbonate doors allow you to see through without
disrupting growth
• The circular vent can be rotated from closed to open, providing
infinite adjustments
• All ventilation openings are screened
• Water reservoir has automatic water level control for supply hose
• Thermostatically controlled heating element is submerged in
water to provide moist heat
• Aluminum heat baffle for more even heating
• Water level sensor turns off heating element before element
damage occurs
• GFCI cord end for safety
• Digital display shows temperature within the chamber
• Easy-set thermostat controls heating and optional ventilation fans
• Shelf Brackets are spaced at 5”
• Metal edged plastic shelves are removable for easy cleaning
• 8” Casters roll smoothly over doorjambs and bumps, 2 locking
• Ships fully assembled and ready to use
Options
• Optional thermostatically controlled ventilation fans increase
humidity within the chamber and prevents possible over heating
especially if chamber will be in direct sunlight
• Optional 18-gallon gravity flow water reservoir can be used if a
faucet is not nearby to keep the heater sump full of water. Tank,
stand, valve, and 5’ hose are included
Phytotronics germination germination chamber chamber
Grow-Tech
Biostrate
Propagation Felt
See Page 271
Two Models Available
GC6- 54” L x 28” W x 47” H has 6 shelves and
holds up to 24 flats - 500 watts
GC12- 54” L x 54” W x 77” H has 12 shelves and
holds up to 48 flats (shown above) - 500 watts
Model Description Lbs Catalog # Each
† GC6 6 shelf germination chamber 248 42-08500 $ 2,640.00
† GC6W/VF 6 shelf chamber with fan 249 42-08510 2,690.00
† GC12 12 shelf germination chamber 337 42-08550 3,240.00
† GC12W/VF 12 shelf chamber with fan 338 42-08560 3,440.00
GT18 18 gallon tank with stand 75 42-08640 255.00
TCF Ventilation Fan Kit 5 42-08660 150.00
Digital Thermostat
Optional GT18
† Crating charge of $50 for truck shipment applies (1/chamber): 24-27000
SHIPPED FOB: Topeka, Kansas
800-325-3055
www.hummert.com
589