2018-2019 Horticultural Catalog

Pressure Regulators
Pressure Regulators
3/4” Low Flow
Catalog # Each
3/4” 08-01440 $ 230.00
1” 08-01460 235.00
1 1/2” 08-01480 490.00
2” 08-00150 134.00
3/4” 1-1/2”
S 20 psi recommended for drippers, spray stakes and inline dripper line
S 35 psi recommended for sprinklers and pressure-compensating drippers
S 65 psi recommended for misters and foggers
Model Pressure Catalog Price per Each
Number Regulators Number 1– 9 10 & up
3/4” Low Flow .25 - 4.4 gpm / 1 spring
32PRV75LF20 20 psi 19-78000 $ 9.89 $ 9.09
32PRV75LF35 35 psi 19-78010 9.89 9.09
3/4” Standard 3.5 - 17.6 gpm / 1 spring
32PRV7520 20 psi 19-78020 $ 18.50 $ 16.80
32PRV7535 35 psi 19-78040 18.50 16.80
32PRV7565 65 psi 19-78060 18.50 16.80
1-1/2” Standard 7 - 35 gpm / 2 spring
32PRV1535 35 psi 19-78100 $ 47.10 $ 42.80
Low-Flow Pre-Set
Pressure Regulator
S The low-flow, pre-set pressure regulator
will accept .5 to 5 gpm — yet will
maintain the output flow of only 6 psi
or 10 psi
S Input/Output are 3/4” FPT x 3/4” FPT
Pressure Catalog Price per Each
Regulator Number 1-9 10 & up
6 PSI Regulator 18-50610 $ 16.35 $ 14.70
10 PSI Regulator 18-50620 16.40 14.75
Dosatron Water Hammer
Arrestor Kits
• Controls the effects of
water hammer
• 316 Stainless steel water
hammer arrestor
• Normal operating pressure -
35 to 500 psi.
• Spike pressure not to
exceed 2,000 psi.
• Comes in 3/4”, 1”, 11/2”,
and 2” sizes
Hammer Arrestor Kit includes:
• 4” nipple, tee, elbow,
close nipple, union,
Teflon® tape roll
Pressure Regulators -
Hose Thread Medium Flow
S Recommended for every low volume or drip
irrigation zone
S Designed to reduce the pressure to the
required working pressure range of
the emitter
S Models are female hose thread x male
hose thread
S Constructed from heavy duty high impact
plastic with internal stainless steel parts to
provide a long lasting quality product
Preset Pressure Regulator
S For low-to-medium flow of 1/3 - 12 gpm to maintain a nominal
constant outlet pressure in irrigation system
S Outlet pressures will vary slightly with changes in inlet pressures
S Size: 3/4” FPT x 3/4” MPT
S Additional flow rates, psi and sizes
are available on special order
Model Outlet Catalog Price per Each
Number Pressure Number 1– 9 10 & up
PR5510-3 10 psi 19-54000 $ 7.29 $ 6.59
PR5515-3 15 psi 19-54010 7.29 6.59
PR5520-3 20 psi 19-54020 7.29 6.59
PR5525-3 25 psi 19-54030 7.29 6.59
PR5530-3 30 psi 19-54040 7.29 6.59
PR5535-3 35 psi 19-54050 7.29 6.59
WILKINS
Outlet Catalog Price per Each
Pressure Number 1– 9 10 & up
15 PSI 18-50800 $ 10.75 $ 9.69
20 PSI 18-50820 11.75 10.55
25 PSI 18-50840 11.75 10.55
30 PSI 18-50860 11.75 10.55
35 PSI 18-50880 10.75 9.69
Back flow Preventers
Protect your most valuable resource…Water
Wilkins is dedicated to assuring
one of life’s essentials…safe
drinking water. Specialist in the
field of back flow prevention,
Wilkins designs and manufactures
each valve to offer the highest
protection against back-siphonage
and back pressure. Every valve is
factory-tested under conditions
far more severe than will be
encountered in the field. This is your assurance that when you buy,
specify or install Wilkins back flow preventers, you are selecting the
most reliable valves in the industry.
Model Size Catalog Number Each
975XL-RP 3/4” 19-17400 $ 340.00
975XL-RP 1” 19-17410 370.00
975XL-RP 1-1/2” 19-17430 740.00
975XL-RP 1-1/4” 19-17450 680.00
975XL-RP 2” 19-17470 830.00
pressure regulators
800-325-3055
www.hummert.com
379