2018-2019 Horticultural Catalog

OLD FRAME
Conley’s CF Series are some
of the strongest, most durable
and economical cold frames
on the market today.
CF Series
These structures have
been employed throughout the
world and can be used in many
different growing conditions.
Main Features
• Two-piece arch that laps and bolts together
• Simple to install
• Arches nest together for more efficient shipping
• Economically priced
Value
• Components are shipped pre-punched and cut to length simplifying
the installation. Step-by-step installation instructions are included
• With more headroom than most structures in its class, Conley’s
ground to ground frames provide ideal environments for growing
Accessories
• Arch aluminum gable end bar with springs and screws
• Arch aluminum spring lock and screws
• Upgrade one 12’ long 3” purlin to 5” purlin
• Upgrade one 10’ long 3” purlin to 5” purlin
• 12’ straight aluminum spring lock and screws
• Galvanized steel endwall frame w/ two “C” uprights and three run girts
• Polycarbonate with fasteners and closure strips for endwalls
• Arch to ground anchor tab with two screws
• 1/4” x 2” carriage bolts with 1/4” nuts
• Extra 5” girt 12’ 4” long (for framing)
• 3’ x 6’ 8” storm door kit with double pane glass
Conley’s cold frame
CF 1000 16’ & 20’ Wide - Ground To Ground
7’ 6”
CF 1100 20’ & 24’ Wide - With 42” Side Walls
8’ 6”
16’
or
20’
or
24’
CF 1200 30’ & 35’ Wide - With 48” Side Walls
12’ 6”
20’
30’
or
35’
Main Features
• Two-piece arch that laps and bolts together
• Simple to install
• Economically priced
• ROLL-FORMED arch design for maximum strength
• Wood for sidewall framing supplied by customer
• The 16’ cold frame accepts 24’ wide polyethylene
• The 20’ cold frame accepts 32’ wide polyethylene
Main Features
• Two-piece arch
• Easy installation
• Economically priced
• ROLL-FORMED arch design for maximum strength
• Wood for sidewall framing supplied by customer
• Three runs of purlins
• The 20’ cold frame with 42” side walls accepts 32’
wide polyethylene ground to ground and 24’ wide
polyethylene eave to eave
• The 24’ cold frame with 42” side walls accepts 40’
wide polyethylene ground to ground and 32’ wide
polyethylene eave to eave
Main Features
• Heavy-duty arch to column connection
• 3” tall ROLL-FORMED arch design for maximum
strength
• Easy installation
• Economically priced
• Wood for sidewall framing supplied by customer
• Five runs of double-bolted purlins
• Arch slips over and bolts directly to sidewall column
• The 30’ cold frame with 48” side walls accepts 48’
wide polyethylene ground to ground and 40’ wide
polyethylene eave to eave
• The 35’ cold frame with 48” side walls accepts 50’
wide polyethylene ground to ground and 48’ wide
polyethylene eave to eave
Note: Conley’s cold frame structures represent non-code designs and are not recommended for regions of heavy snow or high winds
466 800-325-3055
www.hummert.com