Stober 1 Servo Gear Units

PHKX/PHK/PHQK Series: RIGHT ANGLE – Flange Output
PHKX/PHK/PHQK Series Direction of Rotation
PHKX Series
PHK/PHQK Series
CW
1 Stage Units
(PH7 & PH8)
CCW
1 Stage Units
(PH3 thru PH5)
Side 3
Shaft Output
“K”
“P”
Side 4
Shaft Output
For PK units, the “P” Series planetary output
unit can be mounted on either the right (Side 3)
or the left (Side 4) of the “K” Series right angle
secondary unit. Note CCW input direction of
rotation and CW output shaft direction with both
mounting configurations.
IMPORTANT: When ordering, Mounting Side 3
or Side 4 MUST BE SPECIFIED.
2 Stage Units
(PH7 thru PH10)
2 Stage Units
(PH3 thru PH5)
PHKX Mounting Position Options
Horizontal Positions (EL1, EL2, EL5, EL6) are interchangeable;
Vertical Positions (EL3 and EL4) MUST BE SPECIFIED
EL1 EL2 EL3 EL4 EL5 EL6
IMPORTANT: Mounting PKX in either vertical
mounting position (EL3 or EL4) must be
specified when ordering.
PHK/PHQK Mounting Position Options
When ordering, the Mounting Position MUST BE SPECIFIED
using one of the Mounting Position order codes below.
3
5
2
4
6
Note: the code relates to the orientation side that faces down. For example, EL1 has
side 1 facing down, EL2 has side 2 facing down, etc.
1
EL1 EL2 EL3 EL4 EL5 EL6
252 Servo Gear Units V.28
800.711.3588 • www.stober.com