Stober 1 Servo Gear Units

Dimensional Data
Table 1 Dimensions (mm)
Unit a1 B b1 b2 c1 df ef e1 f1 H H1 h i2
PHQ5_K 145 56 110 h7 120 8 40 63 135 10 160 – 60 29
PHQ7_K 179 70 140 h7 152 10 50 80 168 12 190 – 65 38
PHQ8_K 247 90 200 h7 212 12 80 125 233 15 240 – 90 50
PHQ9_K 300 96 255 h7 255 18 90 145 280 20 260 312 160 66
PHQ10_K 330 116.5 285 h7 285 20 95 166 310 20 342 403 212 75
PHQ11_K 425 145 365 h6 365 32 120 200 395 30 410 471 265 190
PHQ12_K 550 170 470 h6 470 45 180 280 510 30 495 565 315 206.5
Table 2 Dimensions (mm)
Unit k L l2 l4 lh m1 o r s1 s7 sf tf v
PHQ5_K 70 201 6 6.5 6 60 116 0.020 5.5 – M8x1.25 11 80
PHQ7_K 88 242 6 6.5 6 65 134 0.025 6.6 – M10x1.50 16 100
PHQ8_K 126 327.5 8 8.5 8 90 187.5 0.030 9 M10x1.50 M12x1.75 17 160
PHQ9_K 145 358.5 11 12 12 100 196.5 0.030 13.5 M8x1.25 M20x 2.25 28 180
PHQ10_K 160 429.5 15 15 10 125 238 0.040 13.5 M10x1.50 M24x2.50 35 200
PHQ11_K 222 571.5 10 10 10 145 236.5 0.040 17.5 M16x2.00 M24x2.50 36 260
PHQ12_K 252 658.5 11 11 10 180 282 0.040 22 M16x2.00 M30 48 330
Motor Mounting Plate
Table 3 Dimensions (mm)
Motor Adapter Code
* h6, h7 = existing values
Base
Module C
ME10
m n C
ME20
m n C
ME30
m n C
ME40
m n C
ME50
m n
Wt.
lbs.
PHQ5_K 197 124 36 201 128 36 — — — — — — — — — 36
PHQ7_K 272.5 143 46 276.5 147 46 278.5 149 46 — — — — — — 67
PHQ8_K — — — 360.5 187 60 362.5 189 60 364.5 192 60 — — — 157
PHQ9_K — — — 372 172 15 384 174 15 376 177 15 — — — 213
PHQ10_K — — — — — — 446 221 20 438 224 20 462 237 20 345
PHQ11_K — — — — — — 519.5 247 24 510.5 249 24 534.5 262 24 672
PHQ12_K — — — — — — — — — 657 294 25 663.5 307 25 1212
Table 4 Dimensions (mm)
Motor Adapter
Code
Thickness 2)
c Min.
Motor Shaft
d2
Max. 1)
ME10 21 19 40 5
ME20 24 32 50 8
ME30 25 38 60 15
ME40 33 48 88 28
ME50 43 60 88.1 42
1) If an adapter bushing is required it will be supplied as a component of the motor mounting plate.
2) Motor plate maximum thickness (L 9 ) will vary with motor shaft length but will not be less than shown.
X
Wt.
lbs.
PHKX/PHK/PHQK Series: RIGHT ANGLE – Flange Output
800.711.3588 • www.stober.com Servo Gear Units V.28 297