VF-FS1 Industrial Inverter - Toshiba

F-11
E6581381
(1) A signal is sent out when the two functions assigned are activated simultaneously.
Terminal
symbol
Title
Function
RY - RC Output terminal selection 1A
RY - RC Output terminal selection 1B
RY - RC Output terminal logic selection
Two different functions can be assigned to terminals RY-RC.
Adjustment range Default setting
0~255
(⇒ See page K-17)
0 : and
1 : or
4 (Low-speed
detection signal)
255 (Always ON)
If parameter is set to (default), a signal will be sent out when the two functions assigned are
activated simultaneously.
Terminals RY-RC: Send out a signal when the functions assigned with and are activated
simultaneously.
Timing chart
RY-RC output
ON
OFF
ON
OFF
ON
OFF
Only one function can be assigned to terminals FLA-FLB-FLC at a time.
(2) A signal is sent out when either of the two functions assigned is activated.
Two different functions can be assigned to terminals RY-RC.
If parameter is set to , a signal will be sent out when either of the two functions assigned is
activated.
Terminals RY-RC: Send out a signal when either of the functions set with and is activated.
Timing chart
ON
OFF
ON
OFF
ON
RY-RC output
OFF
Only one function can be assigned to terminals FLA-FLB-FLC at a time.
0
6