VF-FS1 Industrial Inverter - Toshiba

F-41
E6581381
[0: Supply voltage uncorrected, output voltage limited] [1: Supply voltage corrected, output voltage limited]
Output voltage
[V]
0
Output frequency
Input voltage
High
Low
* The above applies when V/F control mode selection
parameter is set to "0" or "1".
* The output voltage can be prevented from exceeding
the input voltage.
[2: Supply voltage uncorrected, output voltage unlimited] [3: Supply voltage corrected, output voltage unlimited]
Input voltage
Input voltage
Output voltage
[V]
High
Low
0
Output frequency
* The above applies when V/F control mode selection
parameter is set to "0" or "1".
* The output voltage can be prevented from exceeding
the input voltage.
6.12.6 Canceling the operation command
: Reverse-run prohibition
• Function
This function prevents the motor from running in the forward or reverse direction when it receives the
wrong operation signal.
[Parameter setting]
Title Function Adjustment range
0: Forward/reverse run permitted
Default setting
Reverse-run prohibition
1: Reverse run prohibited
2: Forward run prohibited
0
Output voltage
[V]
0
Output voltage
[V]
Output frequency
Input voltage
High
Low
High
Low
0
Output frequency
* Even if is set for an output voltage lower than the input
voltage, the output voltage will exceed the voltage adjusted
by when the output frequency is higher than the base
frequency 1 .
6