VF-FS1 Industrial Inverter - Toshiba

5
Default setting ( = )
E-14
E6581381
Setting to will return all parameters to the standard values that were programmed at the factory.
⇒ See section 4.2.7.
When 3 is programmed, < will be displayed for a short time after setting and will then be erased
and displayed the original indication .. Trip history data will be cleared at this time.
Trip clear ( = )
Setting to initializes the past four sets of recorded error history data.
The parameter does not change.
Cumulative operation time clear ( = )
Setting to resets the cumulative operation time to the initial value (zero).
Cumulative operation time clear ( = )
Setting to clears the trips when an format error occurs. But if the displayed, call us.
Save user setting parameters ( = )
Setting to saves the current settings of all parameters.
⇒ See section 4.2.8.
Load user setting parameters ( = )
Setting to loads parameter settings to (calls up) those saved by setting to .
⇒ See section 4.2.8.
By setting to or , you can use parameters as your own default parameters.
Cumulative fan operation time record clear ( = )
Setting to resets the cumulative operation time to the initial value (zero).
Set this parameter when replacing the cooling fan, and so on.