VF-FS1 Industrial Inverter - Toshiba

6.16 Acceleration/deceleration time 2
6.16.1 Selecting an acceleration/deceleration pattern
: Acceleration/deceleration 1 pattern
: S-pattern lower-limit adjustment amount
: S-pattern upper-limit adjustment amount
F-53
E6581381
• Function
These parameters allow you to select an acceleration/deceleration pattern that suits the intended use.
Title Function Adjustment range Default setting
Acceleration/ deceleration 1 pattern 0: Linear, 1: S-pattern 1, 2: S-pattern 2 0
S-pattern lower-limit adjustment
amount
0-50% 10%
S-pattern upper-limit adjustment
amount
0-50% 10%
1) Linear acceleration/deceleration
A general acceleration/
deceleration pattern.
This pattern can usually be
used.
Output frequency
[Hz]
Maximum frequency
2) S-pattern acceleration/deceleration 1
Select this pattern to
Output frequency
accelerate/decelerate the
[Hz]
motor rapidly to a high-speed
Maximum frequency
region with an output
frequency of 60Hz or more or
to minimize the shocks
applied during
acceleration/deceleration.
Set frequency
This pattern is suitable for
pneumatic transport
0
machines.
×
0
Actual acceleration time
Time [s]
Time [s]
×
6