VF-FS1 Industrial Inverter - Toshiba

F-19
E6581381
[Parameter setting]
Title Function Adjustment range Default setting
VIA input point 1 setting 0-100 (%) 0
VIA input point 1 frequency 0.0-200.0 (Hz) 0.0
VIA input point 2 setting 0-100 (%) 100
VIA input point 2 frequency 0.0-200.0 (Hz)
50.0 (WP type)
60.0 (WN type)
VIB input point 1 setting 0-100 (%) 0
VIB input point 1 frequency 0.0-200.0 (Hz) 0.0
VIB input point 2 setting 0-100 (%) 100
VIB input point 2 frequency 0.0-200.0 (Hz)
50.0 (WP type)
60.0 (WN type)
Communication command point 1 setting 0-100 (%) 0
Communication command point 1 frequency 0.0-200.0 (Hz) 0.0
Communication command point 2 setting 0-100 (%) 100
Communication command point 2 frequency 0.0-200.0 (Hz)
50.0 (WP type)
60.0 (WN type)
Note: Don't set the same value between point 1 and point 2. If set the same falue, the is displayed.
1) 0-10Vdc voltage input adjustment (VIA, VIB)
VIA, VIB terminals
/
60 ( Hz )
Output
frequency
/
0 ( Hz)
/
0 (%)
0
Frequency commnd
/
100 (%)
10V voltage signal
・The output frequency with
respect to the voltage input is
adjusted according to the
selected reference point.
・Gradient and bias can be set
easily.
2) 4-20mAdc current input adjustment (VIA: VIA (SW3) slide switch in the I position)
VIA terminal
Output
frequency
60 ( Hz )
0 ( Hz)
20 (%)
4
Frequency commnd
・The output frequency with respect to
the current input is adjusted
according to the selected reference
point.
・Gradient and bias can be set easily.
・Set to to create a current
input from 0 to 20mA.
100 (%)
20mA current signal
6