VF-FS1 Industrial Inverter - Toshiba

5
5.7 Maximum frequency
: Maximum frequency
• Function
1) Programs the range of frequencies output by the inverter (maximum output values).
2) This frequency is used as the reference for acceleration/deceleration time.
Output frequency
(Hz) When =80Hz
80Hz
60Hz
E-16
When =60Hz
0 100% Frequency setting signal (%)
If is increased, adjust the upper limit frequency as necessary.
・This function determines the value
in line with the ratings of the motor
and load.
・Maximum frequency cannot be
adjusted during operation.To
adjust, first stop the inverter.
E6581381
[Parameter setting]
Title Function Adjustment range Default setting
Maximum frequency 30.0-200.0 (Hz) 80.0
5.8 Upper limit and lower limit frequencies
: Upper limit frequency
: Lower limit frequency
• Function
Programs the lower limit frequency that determines the lower limit of the output frequency and the upper
limit frequency that determines the upper limit of that frequency.
Output frequency (Hz)
Upper limit
frequency
0 100%
Frequency setting signal
* Frequencies that go
higher than will not
be output.
Output frequency (Hz)
Lower limit
frequency
0 100%
Frequency setting signal
* The output frequency
cannot be set at less than
.