VF-FS1 Industrial Inverter - Toshiba

6
(3) Holding the output of signals in ON status
F-12
E6581381
If the conditions for activating the functions assigned to output terminals RY-RC agree with and as a result
the output of signals is put in ON status, the output of signals is held ON, even if the conditions change.
(Output terminal holding function)
Assign input terminal function 62 to a contact input terminal available.
Input terminal function
Function No. Code Function Action
62 HDRY
Holding of RY-RC terminal
output
ON: Once turned on, RY-RC is held on.
OFF: The status of RY-RC changes in real
time according to conditions.
Once output terminal RY-RC is turned on when the contact input terminal to which one of the above
functions (function 62) is assigned is ON, output terminal RY-RC is held ON.
6.3.5 Delay relay output
: Delay time for RY_RC relay
: Delay time for FL relay
• Function
You can use the delay time of output terminal by f146 (Delay time for RY_RC relay) and f147 (Delay
time for FL relay). Each output when the detection time doesn't exceed the delay time become nonactive.
[Parameter setting]
Title Function Adjustment range Default setting
Delay time for RY_RC relay 0.0 ∼ 60 (sec) 0.0
Delay time for FL relay 0.0 ∼ 60 (sec) 0.0
Status
ON
OFF
ON
RY_RC output
+f146 setting
OFF
ON
FL output
+f147 setting
OFF
f146
f146
f147 f147
f146
f147
f146 f146
f147