Triple-Play Service Deployment

58
Acceptance testing between the splitter and the terminals is performed with a
bidirectional loss test set (LTS) for all of the fibers
Central Office
FDF
Figure 3.10 Acceptance testing between the splitter and the terminals
Specific operator requirements exist for loss, distance and ORL
based on the fiber cable network design. Test results are
compared to these requirements and corrective action is taken
when needed. If the issue involves the connection or the jumpers,
the corrective action should be tested with the same loss test
tools. Each result should be recorded in the unit and also on a
customer network database for maintenance purposes. Manual
and automated test solutions are available.
Figure 3.11 Acceptance test report with OTDR
Chapter 3: Deploying and Troubleshooting Fiber Networks
FDH
Splitter
LTS
LTS
LTS
Terminal
LTS
Terminal
Terminal
Customer
Premises