Download as PDF - Touratech Nordic

Navigation
ZUMO handlebar mounting
The ZUMO was specially developed for motorbike
use. The motorbike mounting supplied with the
ZUMO including the power supply and connections
for the headset are to be integrated in the Touratech
handlebar mounting. If the original Garmin motorbike
mounting is used on its own, motorbike vibrations can
cause the unit to oscillate severely within its mounting.
The facts about ZUMO handlebar mounting:
- All mounting options are possible; either on the
12 mm middle strut, using a swivel head adapter or
using the adapter supplied with the Zumo
- All connection options are provided, including the
power supply and headset connection with 2.5/3.5
mm jack. Even an optional TMC module can be
connected
-True Touratech vibration decoupling, right up to the
special decoupling provided by the MvG version, is
implemented
- The special TT mechanics ensure that the Garmin
unlocking mechanism is protected. Single hand
operation is completely retained See also the
detailed figures.
- Laser-cut, aanodized aluminium parts, manufactured
using CMC technology, provide stability and precision
- Spring elements in the special TT design ensure that
the „tendency to oscillate“ of the unit fitted in the
original mounting is minimized.
- We offer two lockable versions. This protects the unit
against snatching during short stops
- The handlebar mounting can be very easily fitted
065-0140
065-0141 *Lockable*
065-0151 *Lockable* „black*
For the „MvG“ version, an extremely specialized vibration
decoupling is used which has its origin in aerospace
technology and has been adapted for motorbike
use. The units are thus almost completely (up to 95%)
protected against vibrations. For units which have not
been specially pre-conditioned by us for motorbike
use or for rough off-road use on strongly vibrating
enduros, we recommend the specially decoupled MvG
version.
065-0142 *Lockable* „MvG“
made for adventure
151