Download as PDF - Touratech Nordic

564
Handlebar risers BMW G 450 X
Sturdy aluminium handlebar risers for the original
BMW fork brace. With our handlebar risers you can
quickly and easily adjust the ergonomics of the Sport
Enduro to fit your personal needs. Available in four
different heights. All heights can be used with original
cables.
5 mm, 10 mm, 15 mm, 20 mm
043-0118
Handlebar mount, PHDS system,
BMW G 450 X
The PHDS (Progressive Handlebar Dampening
System) is a system supported by elastomers that is
designed to absorb engine and chassis vibrations.
The system also dampens the forces acting on the
handlebar in a horizontal and vertical direction,
maintaining steering precision. When the PHDS is
fitted the handlebar can be adjusted in 12 different
positions. Suitable for 28.4 mm handlebars (original
G 450 X handlebars).
043-0026
Handlebar riser for Xtrig PHDS
handlebar clamps
Suitable for Xtrig triple clamps and original G 450 X
fork brace.
043-0027 15 mm
043-0028 20 mm
043-0029 30 mm
Complete triple clamp kit including PHDS,
BMW G 450 X
Complete kit: Xtrig Racing Technology triple clamp with offset
adjustment and PHDS system, offset 27-24mm, X-clamp
system enables adjustment of offset, current offset setting
is shown, steering head bearing already fitted to the shaft
tube, the standard attached parts can be fitted without auxiliary
materials, anodised in the technical factory look. The
PHDS system dampens the forcesacting on the handlebar
while maintaining steering precision. When the PHDS is
fitted the handlebar can be adjusted in 12 different positions.
043-0030 Enduro
043-0031 Supermoto (10mm wider than the
Enduro version)
Off Road Racing Bikes