Download as PDF - Touratech Nordic

384
Adjustable foot rest R 1200 GS/Adventure
Specially developed for the R1200GS, low-set, height
adjustable foot rest sets. By using the 3 screws on
each side the height of the rest can be set to 4 different
positions to suit almost your exact requirements.
Thus you can make the sitting position on your
R1200GS significantly more comfortable. Together
with the adjustable R1200 GS gear lever
(Item no. 044-0432, p.282) almost countless
combinations can be set. The foot rests are made of
stainless steel.
044-0570 all years of construction
R 1200 GS/Adventure wide footpegs
These footpegs have proved to be reliable at our
rallye events. They offer considerably wider foot
base support and also allow longer distances to be
covered while standing on the footpegs.
These footpegs also provide more grip as the grip
studs have very sharp edges.
300-0041 all years of construction
Studded pillion passenger footpegs
For anyone who drives with a pillion passenger
through difficult terrain. With the studded rear
footpegs the pillion passenger has a firm grip too
and does not risk falling off the bike when the going
gets difficult.The wider foot base also allows longer
distances to be covered comfortably while standing
on the footpegs.
Material: high-quality stainless steel
044-0860 all years of construction
Lower pillion passenger footpegs
R 1200 GS
The pillion passenger‘s footpegs can be lowered up,
can be positioned in such a way that they stick out
more and are located more at the front. This enables
a considerably more relaxed riding position.
Not for adventure:
041-0621 all years of construction
041-0622 Adventure from 2007
BMW R1200GS