Download as PDF - Touratech Nordic

BMW R1200GS
Accessory socket
If your motorcycle doesn‘t have an accessory socket
or if you need an additional power supply......
We use the accessory socket.....
...for connecting our CHALA12HD lamp
...to charge the camera barreries
...for our air compressor after repairing a flat tyre.....
Fittings included
Mounts on the crossbar or handlebars
(diameter of tubing 22mm).
With fuse to connect directly to the battery for
example
030-0027
SSR-01 voltage control module
The SSR-01 voltage control modules combines the
features of the above TPS 15 with a delayed voltage
drop function (1 minute). All power consuming
devices are interrupted using a load rejection relay
when starting the R1200GS. The on-board
electrical system socket is also switched off when
doing this. The reason for this is to deliver maximum
battery power to the starter. However, GPS units,
for .example, that consume little are also switched
off and must be rebooted after each short “motor
break”. The SSR module’s delayed voltage drop
function avoids this. Batteries continue to be charged
and the GPS unit remains on when starting the motor.
044-0690 all years of construction
Fuel siphoning adapter line
Practical siphoning line for the R1200GS. Thus you
can, for example, fill your stove or help out another
motor bike rider with fuel quickly and easily by simply
turning the quick fasteners on the fuel line of your
R1200GS. The connector on the adapter line may
vary depending on the year of manufacture. Please
check whether you need a male connector (070-
0692) or a female connector (070-0690).
070-0690 (female connector)
070-0692 (male connector)
made for adventure
395