Download as PDF - Touratech Nordic

Luggage
Pannier Frames
Reliable
- Robust steel
- Pannier frame made from 18 mm diameter
steel.
- Tube with a 2 mm thick wall.
- Bolted crosspiece for better rigidity.
- Black plastic coated.
Pannier Frames
BMW R 1200 GS / Adventure
For all years of construction!
051-0130 *black*
051-0134 *stainless steel*
Pannier Racks for KTM LC8
The Touratech - stainless steel - pannier racks for the
KTM LC8. The rack is made of 18 mm steel tube,
and is attached to existing points.There is no need
to re-position or extend the exhaust. A strut provides
maximum stability even with heavy loads.
- Enhances the enduro design
- Pillion comfort not restricted
- approx. same width on both sides
- Suitable for track and off- road use
- Made of electropolished stainless-steel
- The fitted width of the pannier rack is 52 cm.
051-2250
particularly high level of stability even off the „beaten
In fact, you could say the rear tank is the rear frame.
additional struts on each side of the rack to prevent
two rack elements on the right and left are screwed
that even with panniers in place, there would still be
directly to the pannier rack.
051-0170
made for adventure
Mounting
- Easy to fit.
- Uses standard mounting points.
No modifications to rear footrests.
- Mounting bolts are included.
- Can be used with ZEGA panniers or other panniers
in conjuction with our 18 mm mounting hardware.
297