Download as PDF - Touratech Nordic

BMW F800GS
Kick Stand Support Extension
for F800GS/F650GS (Twin)
The BMW stands much more firmly even on quite a soft
surface with this kick stand support extension. Even if
you park the motor bike in a field you do not always
have to look for a small plank of wood or another
base. Quick and easy to fit. Made of high quality
stainless steel.
048-0145
Long-Distance Footpegs
Our long-distance footpegs are made of top quality
stainless steel. Thanks to the large free areas, dirt simply
falls through them, and the laser-cut edges provide
maximum grip and support. The folddown function of
the original pegs has been retained. Long-distance,
relocated front footpegs The footpegs are fitting further
forward thus providing optimum distance between the
touring boots and the brake lever or gear lever.
041-0625
Long-distance, relocated rear footpegs
The long-distance footpegs are fitted further back thus
providing optimum space for enduro boots.
041-0626
Carbon Shield Pillion Peg
BMW F800GS/F650GS (Twin)
Not everyone likes the simple steel bar on the back left
footpeg. However, as it is extremely important as heel
protection, we have developed a shield in high quality
carbon. Not only does it look extremely elegant, but it
also increases the protective aspect of the bar. To fit, the
hard-wearing and very light shield is simply screwed directly
to the heel protection. Elegant looks and maximum
protection!
048-0360
Studded Pillion Passenger Footpegs
For anyone who rides with a pillion passenger through
difficult terrain. With the studded rear footpegs the pillion
passenger has a firm grip, too, and does not risk falling
off the bike when the going gets difficult. The wider
foot base also allows longer distances to be covered
comfortably while standing on the footpegs. A special
mechanism keeps them folded up when they are not
required. Material: high-quality stainless steel
048-0250
made for adventure
489