Download as PDF - Touratech Nordic

622
Dismantling Aid for the Wheel Shafts,
front + rear
A very useful aid when taking off the wheels. This
enables the wheel shaft to be removed easily and
without tools. It also looks very good at the same
time! Red anodised finish.
410-0170 (front)
410-0173 (rear)
Excel Rims, Husqvarna TE from 2004
Excel wheels for the Sport Enduro, produced exclusively
for Touratech by the Dutch high-end manufacturer
Haan Wheels. Made to the highest specifications,
for many years Excel rim rings have been a guarantee
of the ultimate in quality. Numerous world championship
titles in offroad sports have been won with Excel
rims by Haan Wheels. Apart from which the black
“Made in Japan” rim rings with red hubs also look
extremely good. In our opinion the wheels are vital
for sports use.
Enduro/MX
410-0050 front wheel
(21”x 160 / 4,06 x 53,34 cm)
410-0051 rear wheel
(18”x 215 / 5,46 x 45,72 cm)
Brake Pads Husqvarna TE 250-510; 2009->/ TE 449-511
Our all purpose sintered metal pads offer a powerful initial bite and optimal
wear resistance in extreme conditions. They stand for a progressive feel at the
lever and offer high thermal stability up to 600°C/1000°F degrees. No fading
on high speed downhills. Moto-Master brake pads are 100% compatible with
OEM stainless steel rotors but are designed especially to match our brake
rotors in performance and feeling. Bedding in time is low as optimal pad/disc
contact is acheived after 8 to 10 stops. Moto-Master brake pads are available
in various compounds: -11 compound: Allround sinter pad for offroad and
MX competition. High performance/wear ratio. -12 racing compound: Provides
30% more friction than 11 compound. These high friction pads are designed
for professional MX, SX, and supermoto racing. High thermal resistance.
Excellent initial bite. Developed for world championship motocross and AMA supercross.
043-0202 (type 11 front) 043-0204 (type 11 rear)
043-0203 (type 12 front) 043-0205 (type 12 rear)
Off Road Racing Bikes