Download as PDF - Touratech Nordic

672
370-1530
370-1514
Horn repositioner KTM 690 Enduro
The original position of the horn on the 690 Enduro
isn‘t quite as convenient as it could be.
But now, thanks to our horn repositioner, it can be
positioned elegantly, reliably and almost invisibly
behind the radiator.
Material: 2 mm stainless steel
370-1558
Hard Part guard brake cylinder, KTM 690
Enduro
The rear brake cylinder has absolutely no protection
at all when it is in place. Failure of the rear brake
when riding off- road is practically inevitable. This
strong cover made of 3 mm aluminium is the answer.
370-1518
Rear KTM 690 Enduro brake fluid reservoir
cover
This beautiful looking, functional cover is simply screwed
onto the existing mounting points. This ensures
that it is no longer so easy for anyone to remove the
brake fluid reservoir cover.
It is still very easy to read the level in the reservoir.
Made of laser-cut stainless steel.
370-1556
Crash bar, engine, KTM 690 Enduro
A strong tubular bar in 18 mm stainless steel will protect
the left and right sides of the engine in the event
of a fall or when riding off-road over rocky terrain. In
an elegant electropolished finish. The roll bar can be
combined with the top roll bar (370-1514) and the
aluminium engine guard (370-1524). The installation
materials and instructions are included in the delivery.
370-1514
370-1530
KTM