Download as PDF - Touratech Nordic

430
Brake lever extension HP2
You know how annoying it is to miss the brake
lever. Our extension offers you a larger support
surface and safe pressure on the brake lever.
044-2035
BMW HP2 kick stand support extension
The HP2 stands much more firmly even on quite a
soft surface with this kick stand support extension.
Even if you park the motor bike in a meadow you do
not always have to look for a small plank of wood or
another base. This practical part is made of a combination
of stainless steel laser parts and anodised
aluminium. Quick and easy to fit.
044-2016
BMW HP2 brake line clamp cover (rear)
On the HP2 the brake line clamp is in an exposed
position and is not protected. If this fragile plastic
clamp is destroyed by stones etc., the brake line is
no longer fixed. Then there is a much higher risk that
the brake line can be damaged. The clamp cover is
made from 1.5 mm anodised aluminium and fixed
with the original nuts.
044-2009
BMW HP2 brake line clamp cover
On the HP2 the brake line clamp at the front of the
fork is in an exposed position and is not protected.
If this fragile plastic clamp is destroyed by stones etc.,
the brake line is no longer fixed to the fork. Then
there is a much higher risk that the brake line can be
damaged. The clamp cover is made from 1.5 mm
anodised aluminium and fixed with the original nuts.
044-2008
BMW HP2