Download as PDF - Touratech Nordic

Triumph Tiger 800
Radiator Guard, Trimph Tiger 800
The radiator on the 800’s 3-cylinder engine is pretty
large, making it susceptible to dirt and stone impacts.
As the original plastic radiator guard provides
only limited protection on rough gravel roads, we
recommend replacing it with an aluminium radiator
guard. Touratech’s radiator guard for the Tiger 800
offers impeccable protection against stones, optimises
airflow and is made from black anodised laser-cut
aluminium that unobtrusively blends in with the bike’s
overall appearance. It attaches at the existing attachment
points. The radiator cover can cause the engine
to overheat under extreme conditions with high
outside temperatures and an extreme engine load.
420-5015 anodised black
420-5016 anodised alu
Oil Filter Guard, Triumph Tiger 800
On the Triumph Tiger 800, the oil filter is located just
behind the front wheel at a slight offset. Accessible
with almost no protection, it is exposed to hard stone
impacts and heavy soiling. Touratech’s oil filter guard
for the Tiger 800 protects the oil filter against stones
and dirt so that it doesn’t get damaged. It can be
hard to find spares for this part, especially on a long
trip, so effective protection for this sensitive engine
component is essential. Made out of anodised
aluminium and stainless steel components and fitted
to existing attachment points, this is the perfect complement
to the long-distance appeal of the Triumph
Tiger 800.
420-5085 anodised silver
420-5086 anodised black
Manifold Guard, Flexible
Triumph Tiger 800
This heat shield is made from laser-cut stainless steel.
Thanks to the special construction, it can easily
be adapted to any manifold shape. Not only does
it provide heat protection, but it also protects the
endangered points of the exhaust system against
stone-chipping or in the event of a fall.
Supplied with: 3 pce., including 6 collars.
420-5065
made for adventure
783