Download as PDF - Touratech Nordic

Husqvarna TE 250-511
Brake Line Clamp Cover
TE 250-510; 2010->/ TE 449-511
The unprotected brake cable clamps are in an exposed
position on the Husqvarna. If this fragile plastic
clamp is destroyed through an impact from a stone
or similar, the brake cable is no longer held in place.
There is then a much greater risk of the brake cable
getting damaged. The clamp protector is made of
anodised aluminium 1 mm thick.
410-0115 (front)
410-0114 (rear)
Lambda Probe Guard Husqvarna
In shrubs, a branch from a tree getting into the bike
can easily cause a blockage, or the bike might suffer
an unlucky fall and land on something like a stone
or similar. If the Lambda probe is damaged in the
process, the engine runs considerably worse and
in the worst case, the expensive manifold could get
damaged. The Touratech Aluminium guard reduces
this risk considerably!
410-0113 TE 250 from 2010
410-0112 TE 310-510 from 2009
made for adventure
Touratech Racing / GCC Tollwitz
615