Download as PDF - Touratech Nordic

296
Luggage
Markus Golletz / Italy
Pannier Racks KTM 690 Enduro
The pannier rack for the KTM 690 Enduro is made of 18 mm stainless steel tube, which guarantees a
track“. The reason for this sturdy design is that KTM has not fitted a proper rear frame to the 690 Enduro.
The pannier rack is fastened via two struts to the right and left of the rider‘s footpeg holder. There are two
the pannier rack from twisting. One strut would not be enough to give the rack the necessary stability. The
together by a bar behind the number plate mounting. The position of the rack was chosen to make sure
enough room in tight bends.The fitted width of the pannier rack is 48 cm. The pillion footpegs can be fitted