Download as PDF - Touratech Nordic

338
Hard Part SA
Windscreen support BMW R 1200 GS
The windshield of the R1 200 GS “shakes” quite
strongly, especially at low revolutions and on fast trips.
Sometimes it shakes so strongly that real turbulence
occurs and the in no way bad wind protection of
the R1200GS decreases significantly. Even using the
small hard part windshield aluminium parts (044-
0380) is of relatively little use in this special case
because the forces simply act further up. With
this support the windshield is supported at more
places and the problem is almost eliminated.
It is very easy and quick to fit.
044-0414 up to 2007
044-0415 from 2008
Hard Part windscreenBMW R 1200 GS
Say goodbye to broken windscreen elements after a
crash or off-road session! With this hard part for the
windscreen of the R1200GS, the plastic mounting
elements are protected against breakage in the
event of a crash or heavier than normal use, which
may make it impossible to continue riding with the
windscreen. The plastic parts are simply replaced with
anodised aluminium parts and the problem is solved
once and for all.
Super easy to change and very short installation time.
044-0380
BMW R1200GS
TT-Austria / Toureast2010.com