Download as PDF - Touratech Nordic

KTM
Aluminium engine guard, KTM 690 Enduro
The engine of the KTM 690 Enduro sits in a
strong multi-tubular frame. We offer a very strong
engine guard made of 4 mm aluminium steel sheet to
protect the underside of the engine.
The sides of the engine guard are made of 3 mm
aluminium, and are riveted to the baseplate.
The guard is fitted decoupled. This means that no resonance
noise is transmitted, and the loads on engine
and frame are minimised.
The engine guard can be combined with the two
roll bars 370-1514 and 370-1530.
370-1524
Rear KTM 690 Enduro brake fluid
reservoir cover
This beautiful looking, functional cover is simply screwed
onto the existing mounting points. This ensures
that it is no longer so easy for anyone to remove the
brake fluid reservoir cover.
It is still very easy to read the level in the reservoir.
Made of laser-cut stainless steel.
370-1556
Folding brake lever attachment kit,
KTM 690 Enduro
The foot brake lever can easily get bent in rocky
terrain. Reason enough for us to replace the surface
of the original one with a folding one. The original
footrest is dismantled and the folding version fitted in
its place.
370-1507
Folding brake lever fixing kit “Sport” EXC
The brake lever can break even if you just fall. This
will make it very difficult, if not impossible, to go any
further. With our brake lever you can reduce this risk
easily and effectively because of the folding
front lever.
120-0530
made for adventure
673