silo 3 - U.S. Department of Energy

e
e.
~
Table 3-2 MRS Interlocks
2 Shut down Inclined Conveyor and
Retrieval Bin Discharge Feeder if
Transfer Conveyor is not running.
3
4
13
19
~~ ~ ~~~
IShut down Transfer Conveyor if Feed
'Conveyor is not running.
i shut down Inclined Conveyor (both
motors) on High-High Current or Low
Speed.
33 Shut down Retrieval Bin Discharge
Feeder if Inclined Conveyor shuts
- - - - __ - - __ - - - do!?!, . - - - -- - - - - -. - - - - - -- -
39
Allow feeder to run only if one of the
two discharge valves is open.
Allow Retrieval Bin Discharge Feeder
to run only if discharge valve is open.
Shut down Retrieval Bin Discharge
Feeder on High-High Current or Low
Speed.
. Table 3-3 MRS Setpoints
Process Control Plan for the Silo 3 Project
Document No. 40430-PL-0003. Rev. 1
Jacobs Project Number 35H19605
September 5, 2003
5069
~ FDR-11-5100 ZS-AOV-25-5260A
, ZS-AOV-2 5-5 260B
FDR-11-5100 YS-FDR-10-5 102
DFC-11-5056 II-DFC-11-5056
SSL-DFC-11-5056
FDR-11-5106 YS-AOV-11-5009
FDR-11-5106 1 II-DFC-11-5056
14 amps High-High Current (1 3)
DFC-11-5056 SSL-DFC-11-5056 0 rprn Low speed (1 3)
FDR-11-5 100 II-FDR-11-5 1 00 Current:
2.5 amps Low Operator Action
4.5 amps High Operator Action
4.8 amps High-High Operator Action
FDR-11-5100 SSL-FDR-11-5100 0 rpm Low speed (2)
FDR-11-5 106 II-FDR-11-5 106 Current:.
6amps Low Operator Action
12 amps High Operator Action
14 amps High-High (39)
FDR-11-5106 SSL-FDR-11-5106 0 RPM Low Speed (39)
All setpoints will be reviewed and modified as necessary during startup.
3-4
I
I