02.03.2013 Views

silo 3 - U.S. Department of Energy

silo 3 - U.S. Department of Energy

silo 3 - U.S. Department of Energy

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

0<br />

Break up compacted material within Silo 3;<br />

Access and Retrieval Strategy for the Silo 3 Project<br />

Document No. 40430-PL-0002, Rev. 1<br />

September 2003<br />

Retrieve miscellaneous debris, such as simple hand tools, PPE, and plastic bags from<br />

the <strong>silo</strong>; and<br />

Carry and manipulate a hose for pneumatic retrieval, as required, to support mechanical<br />

operations.<br />

4.1.2 RETRIEVAL BIN (HBN-11-5054)<br />

The Retrieval Bin is a rectangular bin located just east <strong>of</strong> the Silo 3 opening, and is covered<br />

by load-bearing grating that includes a ferrous magnet. The magnet assembly mounts<br />

within the grating system and limits the size and the amount <strong>of</strong> debris (especially metallic<br />

debris) that would otherwise drop into the Retrieval Bin Discharge Feeder. Debris is<br />

removed from the grating by the Excavator (with appropriate attachments) or manually, if<br />

necessary.<br />

The bin is below-grade and has steep sides that allow it to be used as both a chute and a<br />

hopper. The bin is designed to allow the Excavator to drive over the opening without<br />

damage to either the bin or the grate.<br />

4.1.3 OTHER MRS EQUIPMENT<br />

FDR-11-5106, Retrieval Bin Discharge Feeder, is a variable-speed screw feeder used to<br />

transfer material, at an operator-set rate, from the Retrieval Bin to the Inclined<br />

Conveyor.<br />

DFC-11-5056, Inclined Conveyor, is a pocketed belt conveyor used to transfer material<br />

to the required elevation for packaging.<br />

FDR-11-5 100, Transfer Conveyor, is a constant-speed screw feeder used to transfer<br />

material from the Inclined Conveyor to the Feed Conveyor that feeds material to the<br />

packaging system.<br />

EAR-1 1-5052, Retrieval Bin Hood, and EAR-1 1-5053, Excavator Room Hood, are<br />

exhaust air registers that collect air inside the Excavator Room that is conveyed by<br />

ductwork to the Process Vent System dust collectors.<br />

4.1.4 EXCAVATOR ROOM AND EXCAVATOR SERVICE ROOM<br />

Both the Excavator Room and the Excavator Service Room include the following features:<br />

Provisions for decontamination <strong>of</strong> the Excavator (i.e., plant air, vacuum, and process<br />

water); and<br />

Trenches and sumps to collect both misting and wash water, and sump pumps to<br />

transfer the water to the Wastewater Tanks.<br />

13<br />

000073

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!