silo 3 - U.S. Department of Energy

Process Control Plan for the Silo 3 Project
Document No. 40430-PL-0003, Rev. 1
Jacobs Project Number 35H19605
5049 September 5, 2003
The following PFD and P&IDs illustrate the Container Management and Sampling Systems:
94X-3900-F-01431 F0003 Process Vent and Packaging Systems
94X-3900-N-01436 NO1 03 Bulk Bag Packaging Line A
94X-3900-N-01437 NO104 Bulk Bag Packaging Line B
511
Two parallel packaging lines are provided. Major equipment in the Container Management
System is listed in the following sections. For detailed descriptions of all equipment
associated with the Container Management and Sampling Systems, see PD, Section 3.1 .
5.1 .I
These vendor-supplied systems contain the following equipment:
0
CONTAINER MANAGEMENT AND SAMPLING SYSTEM EQUIPMENT
Container Management and Packaging Systems A&B (SKD-25-5250A&B)
PKU-25-5270A&B: Package Loading Stands A&B
RCV-25-5278A&B: Package Staging Conveyors A&B
RCV-25-5282A&B: Airlock Conveyors A&B
0 RCV-25-5288A&B: Off-Loading Conveyors A&B
5.1.2 Transport Equipment
0 BRC-25-5280: Bridge Crane
Cargo containers, forklift, loading crane, and rail cars and/or trucks
5.1.3 Miscellaneous Equipment
0
0
0
SSS-84-5252A&B: Packaging Samplers A&B
NOZ-25-5260A&B: Discharge Chute Assembly A&B
EAR-25-5290A&B: Packaging Station Exhaust Registers A&B
ENC-25-529 1 A&B: Packaging Frames A&B
RDR-05-5918: Roll-up Door 007D (Line A)
RDR-05-5912: Roll-up Door 007G (Line A)
RDR-05-5920: Roll-up Door 007C (Line B)
RDR-05-5914: Roll-up Door 007F (Line B)
RDR-05-5916: Roll-up Door 007E (Process Building)
5.2 CONTAINER MANAGEMENT SYSTEM INSTRUMENTATION
Table 5-1 summarizes, by function, all of the instrumentation in the Container
Management and Packaging System.
,. ,
5-1
I
I
I
I