VMX12 Service Manual - V-Max Outlaw

--
BRAKE FLUID LEVEL INSPECTION
3. Eliminate:
*Dust
Use the compressed air.
Blow out dust in the element from the
outer surface.
4. Inspect:
Damage Replace.
5. Install:
filter case cover
cover
BRAKE FLUID LEVEL INSPECTION
Brake Inspection
1. Inspect:
fluid level (brake master cylinder)
Level low Replenish fluid.
Lower
NOTE:
Be sure that:
fluid is cleaned up immediately to prevent
painted surfaces or plastic parts from
erodina.
Use only the designated quality brake fluid,
otherwise poor brake performance will result.
*Water does not enter the master cylinder when
refilling, otherwise poor brake performance.
2-20