VMX12 Service Manual - V-Max Outlaw

BATTERY INSPECTION
2. Remove:
3. Inspect:
Battery fluid specific gravity
Out of specification Charge.
Always charge a new battery before using it to
ensure maximum performance.
1.4 amps/10 hrs
Specific Gravity:
4. Install:
Battery
5. Connect:
Breather hose
Be sure the hose is properly attached and
routed.
When inspecting the battery, be sure the breather
hose is routed correctly. If the breather hose
touches the frame or exits in such a way as to
cause battery electrolyte or gas to exit onto the
frame, structural and cosmetic damage to the
motorcycle can occur.
Battery
Pass through guide
6. Inspect:
hose
Obstruction Remove.
Damage Replace.
2-36