VMX12 Service Manual - V-Max Outlaw

ENGINE ASSEMBLY AND ADJUSTMENT
3. Tighten:
nuts or bolts
By the following specification torque.
4. Adjust:
Clutch Release Cylinder:
12 Nm (1.2 8.7
Middle Gear Case Cover:
10 Nm (1.0 7.2
Change Pedal:
10 Nm (1.0 7.2
Footrest (Left):
40 Nm (4.0 29
Footrest (Right):
23 Nm (2.3 17
Rear Brake Master Cylinder:
23 Nm (2.3 17
0 Rear brake switch
Refer to "CHAPTER 2. REAR BRAKE
SWITCH ADJUSTMENT" section,
5. Bend the tabs on the air baffle plate
(front) as shown.
6. Adjust:
cable (V-boost)
Refer to "CHAPTER CARBURETION,
V-BOOST" section.
7. Tighten:
nuts or bolts.
By the following specification torque.
7Nm(0.7 5.1
Radiator Cover:
4 Nm (0.4 kg, 2.9
Carburetor Joint:
10 Nm (1.0 7.2
3-80