VMX12 Service Manual - V-Max Outlaw

INSPECTION AND REPAIR
6. Remove:
caps
7. Measure:
Width of
Out of specification Follow step8. Camshaft-to-cap Clearance:
Standard: 0.020-0.054 mm
(0.0008 0.0021 in)
Maximum: 0.160 (0.006 in)
8. Measure:
Camshaft outside diameter
Use a micrometer.
Out of specification Replace camshaft.
Within specification Replace cylinder
head.
Camshaft Outside Diameter:
Standard: 24.967-24.980 mm
(0.9830-0.9835 in)
Cam Cap Inside Diameter:
Standard: 25.000 25.021 mm
0.9851 in)
Cam Chains
1. Inspect:
chains
Chain Replace.
Cam Sprockets
1. Inspect:
sprockets
Chain Dampers
1. Inspect:
Upper damper
damper
Rear damper
Wear Replace.
Replace.
3-28