VMX12 Service Manual - V-Max Outlaw

--
INSPECTION AND REPAIR
NOTE:
Measurement should be made at a point 6.2 mm
(0.244 in) above the bottom edge o f the piston.
Standard
Oversize 1
Oversize 2
2nd Ring
Size
75.905 75.955 mm
(2.9884 2.9903 in)
76.25 mm (3.002 in)
76.50 mm (3.012 in)
3. Measure:
clearance
Out of specification cylinder
or replace piston.
Piston Clearance = C- P:
0.055 0.075 mm
(0.0022 -0.0030
C: Cylinder bore P: Piston outside
Piston Ring
1. Measure:
clearance
Use the Feeler Gauge .
Out of specification Replace piston
and/or rings.
Side Clearance
0.0028 in)
(0.0047 in)
0.02-0.06 mm 0.12 mm
(0.0008
0.0024 in)
(0.0047 in)
I
3-30