VMX12 Service Manual - V-Max Outlaw

Reservoir Tank Capacity:
0.30 L (0.26Imp qt, 0.32 US qt)
*Hard water or salt water is harmful to the
engine. You may use distilled water if you
can't get soft water.
not mix more than one type of ethlen
glycol antifreeze containing corrosion for
aluminum engine inhabitors.
Coolant filling steps:
the coolant into the conduit until the
conduit isfull.
*Start the engine (coolant level decreases.)
Always check level, and check for
coolant leakage before starting engine.
the coolant while engine is running.
*Stop the engine when coolant level stabilizes.
the coolant again to specified level .
*Install the radiator cap.
*Align the coolant drain valve "OFF" mark
with the match mark on drain valve
housing.
11. Connect:
*Feed hose (reservoirtank)
12. Fill:
*Reservoir tank
Add the coolant until liquid reaches
"FULL" level mark.
"FULL" level
level
4-4