VMX12 Service Manual - V-Max Outlaw

2-13
IDLING SPEED ADJUSTM ENT/
THRO TTLE CABLE ADJUSTMENT
Vacuum Synchronous Difference:
2.66 kPa (30 m m H g, 0.79 in Hg)
*R epeat the above steps to synchronize
carburetor No. 3 to carburetor No. 4 by
turning synchronizing screw “B ” until
both gauges read the sam e.
R epeat the sam e steps to synchronize N o. 4
carburetor to No. 2 carburetor, then turn
synchronizing screw “C” until both gauges
read the sam e.
IDLE SPEED ADJUSTM ENT
1. Adjust
Idle speed
W arm up the engine and turn the throttle
stop screw to adjust.
THRO TTLE CABLE
NOTE:
ADJUSTMENT
B efore adjusting the throttle cable free play, the
engine idling speed should be adjusted.
1. C heck:
*Throttle cable free paly
Out of specification Adjust.
2. Adjust:
*Throttle cable free play
B y the follow ing adjustm ent steps,
Throttle cable adjustm ent steps:
Loosen the locknut .
the adjuster clockw ise or counter-
clockw ise until proper free play is attained.
*Tighten the locknut,
I