VMX12 Service Manual - V-Max Outlaw

FRONT AND REAR BRAKE
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have
pered.
j. Add brake fluid to the level line on the
reservoir.
BRAKE DISC INSTALLATION
1. Install:
Brake
NOTE:
brake disc should be installed with the
arrow mark face outward.
arrow mark on the disc must point
toward the rotating direction of the wheel.
2. Tighten:
Bolts (disc)
Bolts (Brake Disc):
20 Nm (2.0 14
6-20