VMX12 Service Manual - V-Max Outlaw

NOTE:
sure all cam caps are covered with oil
plugs
mark on the cover should face
toward the exhaust side.
the head cover gasket and replace it
if damaged.
3. Tighten:
Bolts (cylinder head cover)
*Spark plugs
Cylinder Head Cover:
10 Nm (1.0 7.2
I Spark Plug:
I 17.5 Nm (1.75 12.5
4. Install:
plug
*Special washer
Crankcase cover plate
NOTE:
Check for clog of oil passage in the bolt. If
any, clean the oil passage.
V-BOOST
Install:
V-boost assembly
NOTE:
the O-ring on the V-boost, and
replace it i f damaged.
the bolts in a crisscross pattern.
10 Nm (1.0 7.2
3-78