VMX12 Service Manual - V-Max Outlaw

CHARGING SYSTEM
CHARGINGVOLTAGE TEST
1. Remove:
*Seat
2. Connect:
Tester
To battery terminals.
3. Start the engine and accelerate to about
2,000 or more.
4. Measure:
Generator voItage
Out of specification Check battery,
stator coil, and
Generator Voltage: 14.5
Never disconnect the wires from the battery
while the generator is operating, otherwise the
voltage across the generator terminals will
increase and damage the semiconductors.
BATTERY INSPECTION
Refer to "CHAPTER 2 BATTERY INSPEC-
T N" section.
STATOR COIL RESISTANCE TEST
1. Remove:
*Side cover (left)
2. Disconnect:
03-pin conn'ector (White, White and White)
From
3. Connect:
Tester
7-20