VMX12 Service Manual - V-Max Outlaw

--
HEADLIGHT BULD REPLACEMENT
NOTE:
If a torque wrench is not available when you are
installing a spark plug, a good estimate of the
correct torque is 1/4 to 1/2 turns part finger
tight. Have the spark plug torqued to the correct
value as soon as possible with a torque wrench.
HEADLIGHT BULB REPLACEMENT
1. Remove:
Headlight lens unit
2. Disconnect:
lens unit leads
3. Remove:
Turn the bulb holder counterclockwise
to release bulb.
Do not touch headlight bulb when it is on as the
bulb generates enormous heat; keep flammable
objects away.
4. Install:
(new)
Secure the new bulb with the bulb holder.
Avoid touching glass part of bulb. Also keep it
free from oil otherwise, transparency of glass,
bulb life and illuminous flux will be adversely
affected. If oil gets on bulb, clean it with a cloth
moistened thoroughly with alcohol or lacquer
thinner.
Don't touch
5. Install:
lens unit
2-38