VMX12 Service Manual - V-Max Outlaw

5-15
a’
V-BOOST
V-boost Synchronization
NOTE:
Before synchronizing the V-boost, the control
cable should be adjusted.
2. Adjust:
0.4 0.1 mm (0.016 0.004 in)
By the following adjustment steps.
V-boost synchronization adjustment step:
the locknut .
the adjuster clockwise or counterclockwise
until proper clearance is attained.
the clearance. If not, repeat above
step.
the locknut. Apply to
the locknut.
I NSTAL ON
1. Install:
V-boost assembly
Reverse the removal steps.