2 - Fagor Automation

Version history
0.
18
18
- VERSION HISTORY -
DDS
HARDWARE
Ref.1209
Manual reference Events
0410
New SERCOS board
(transmission speed up to 16Mbd)
0602 New compact drives: ACD / SCD / CMC 1.25A
New compact drives: ACD / SCD / CMC 2.35
New resistors: ER-33/550 and ER-18/900 (as accessory)
Regenerative regulated power supplies. Boost (step-up) power
Supplies: RPS-75, RPS-45 and RPS-20.
Choke RPS-75, choke RPS-45 and choke RPS-20.
0606 No new hardware has been implemented.
0612 New choke XPS-65 (smaller and lighter).
0706 New VECON3 board
Sales references of the glass fiber optic cable SF0-V-FLEX
New ER-18/1000+FAN resistor with fan.
0710 No new hardware has been implemented.
0802 New compact drives: ACD / SCD / CMC 2.50.
There are now 3 switches for selecting the ballast resistor on PS-
25B4 power supplies.
New CAPMOTOR-2 board.
0806 The choke RPS-75-3 replaces the choke RPS-75.
There are now 3 switches for selecting the ballast resistor on PS-65A
power supplies.
0811 The following are being replaced:
External 18 /1800 W Ballast resistor that is supplied as an accessory
in certain units for 18/1800W with internal thermostat.
External Ballast resistor ER-18/2200 by ER+TH-18/2200 with
internal thermostat
0905 External 24/750W Ballast resistor that is supplied as an accessory
in certain units for 24/750W with external thermostat.
Changing the power connector for motor connection at SPD 3.200
drives.
1003 The external ballast resistor with fan ER-18/1000+FAN has been
replaced with the new ER+TH-18/1000+FAN with fan and external
thermostat.
The auxiliary APS 24 power supply has been modified and it can now
be connected to the DC bus of the PS, XPS and RPS power supplies.
New regenerative regulated power supply RPS-80
New modular spindle drive SPD 3.250
1107 No new hardware has been implemented.
1109 No new hardware has been implemented.
1209 Functional safety. STO safety function.
New spindle compact drive SCD 2.75.