The Braille Lite M20-M40 User's Manual - Freedom Scientific

More documents

Recommendations

Info

Parameter=local IP (default is 0.0.0.0, which means auto detect; most people should not need this setting) Parameter=server IP (allows you to define an IP address to connect to on the server; default is 0.0.0.0, which is auto detect) Parameter=mode (default value is 0) PPP Mode Submenu: • Disable PAP on/off • Disable CHAP on/off • Enable VJ compression on/off POP3 section: Username/password (used to check mail) Parameter=server IP (default is 0.0.0.0; can be defined by the user if necessary) Parameter=server name [the name of the POP server; not needed if exact IP address is defined (i.e., if a user knows the IP address for their ISP and chooses to use that information instead of the auto detect)] Parameter=mode (default value is 0) POP3 Mode Submenu: • Leave messages on server by date on/off • Interactive mode for oversized messages on/off 128 Part# 440013-001 Rev. D
Parameter=size (default value is 0; set message size limit in KB; see discussion of interactive size mode; 0 is unlimited) SMTP section: Parameter=server IP (allows you to define SMTP server IP address) Parameter=server name (SMTP server name; not necessary if IP address has been defined) Parameter=email (outgoing email address) Checking for new E-mail Run the Mailer.bns program to check for new email: 15. Press O-CHORD, F to enter the File Menu. 16. Navigate to the Mailer.bns program with either the Whiz Wheels or by using DOT 1 or DOT 4 CHORD. 17. Press O-CHORD to run the Mailer.bns program. As the program is running you will hear the modem dial out, a sequence of beeps, and progress messages that are dependant on your unit’s settings. For example, if Interactive Size Mode is on and you are downloading a message that is over the size you have defined, you will hear the prompt, "Message X psize in bytes is over the limit. Press E-CHORD to download, Z-CHORD to skip, Part# 440013-001 Rev. D 129
Page 1 and 2:
TThhee BBrraaiillllee LLiittee MM22
Page 3 and 4:
Table of Contents INTRODUCTION ....
Page 5 and 6:
Global Searches ...................
Page 7 and 8:
Requirements ......................
Page 9 and 10:
APPENDIX D: FAQ’S ...............
Page 11 and 12:
Introduction The Braille Lite is a
Page 13 and 14:
Overview The M20 and M40 Braille Li
Page 15 and 16:
allow you to scroll text by line, b
Page 17 and 18:
Note: For external devices to work
Page 19 and 20:
possibly void any existing warranty
Page 21 and 22:
Onboard Help You can access the Hel
Page 23 and 24:
Scroll display slower DOT 2 Navigat
Page 25 and 26:
Use this parameter if you have prev
Page 27 and 28:
• To exit the Status Menu & save
Page 29 and 30:
Creating a File To create a new fil
Page 31 and 32:
• To move quickly through a file:
Page 33 and 34:
2-3-4 2-5, DOTS 3-4-6 CHORD) delete
Page 35 and 36:
exit the File Menu. You can create
Page 37 and 38:
• Key Click - Typed keys click as
Page 39 and 40:
setting will not take effect until
Page 41 and 42:
ST-SIGN CHORD, $, I (DOTS 3-4 CHORD
Page 43 and 44:
The Datebook To enter an appointmen
Page 45 and 46:
calculation. To store a value to me
Page 47 and 48:
Using the Braille Lite Part# 440013
Page 49 and 50:
Creating Files To create a file: 1.
Page 51 and 52:
Next word DOT 5 CHORD Previous word
Page 53 and 54:
Whiz Wheels The Whiz Wheels, locate
Page 55 and 56:
• Append: Typed text is appended
Page 57 and 58:
Paragraph (P)(DOTS 1-2-3-4): Prompt
Page 59 and 60:
Pasting Information To paste inform
Page 61 and 62:
• Press C-CHORD (DOTS 1-4 CHORD)
Page 63 and 64:
Currently Open File DOTS 4-6 List M
Page 65 and 66:
check an entire file, first move yo
Page 67 and 68:
5 CHORD, DOTS 1-2-4) to activate th
Page 69 and 70:
startup and Flash Startup are the d
Page 71 and 72:
folder. Press SPACEBAR again to unm
Page 73 and 74:
The Braille Lite Utilities Equipped
Page 75 and 76:
Setting Hourly Announcement The Bra
Page 77 and 78:
The Datebook The Braille Lite Dateb
Page 79 and 80:
CHORD (DOTS 1-5 CHORD) to return to
Page 81 and 82:
To use the countdown timer you must
Page 83 and 84:
Performing Percentage Calculations
Page 85 and 86:
To switch to radians, press R-CHORD
Page 87 and 88: labeled A through Z. Memory locatio
Page 89 and 90: on the Name Field. Use a consistent
Page 91 and 92: • Press E-CHORD (DOTS 1-5 CHORD)
Page 93 and 94: AAddvvaanncceedd BBrraaiillllee LLi
Page 95 and 96: Recording a Macro To record, positi
Page 97 and 98: To erase a Start Up macro, press N-
Page 99 and 100: for creating a folder on the CF car
Page 101 and 102: Rearranging files You can rearrange
Page 103 and 104: Issuing the copy command Last, type
Page 105 and 106: Printing and Embossing Most printer
Page 107 and 108: Line L (DOTS 1-2-3) From Cursor to
Page 109 and 110: Page Numbering Number Pages specifi
Page 111 and 112: of text, the center command ( $C )
Page 113 and 114: Set Bottom Margin ( $MB# ) (DOTS 1-
Page 115 and 116: Tabs Tabs work similar to word proc
Page 117 and 118: Headers and Footers Use headers and
Page 119 and 120: Wait for a Keypress After Each Page
Page 121 and 122: installed, WinDisk displays the Bra
Page 123 and 124: Note: Moving to the Blazie Engineer
Page 125 and 126: Warning: The restore process erases
Page 127 and 128: containing several graphical icons.
Page 129 and 130: 12. Press Y (DOTS 1-3-4-5-6) for Y
Page 131 and 132: • Type the name of a file located
Page 133 and 134: 11. Press O-CHORD to open the Optio
Page 135 and 136: Edit Parameter E-CHORD When you edi
Page 137: external modem (connected through t
Page 141 and 142: Bottom of list DOTS 4-5-6 CHORD Nex
Page 143 and 144: The following commands are availabl
Page 145 and 146: Replying to or Forwarding Messages
Page 147 and 148: Edit an entry E E-CHORD DOTS 4-6 CH
Page 149 and 150: is not an available option. Select
Page 151 and 152: Cold Reset A cold reset may result
Page 153 and 154: Braille Lite, and run it. After com
Page 155 and 156: After the messages are finished, th
Page 157 and 158: AAppppeennddiicceess Part# 440013-0
Page 159 and 160: Open File O Open Selected File O-CH
Page 161 and 162: Other Tell Size of Selected File DO
Page 163 and 164: Delete Empty Folder DOTS 3-6 Rename
Page 165 and 166: Open Currently Selected File O Open
Page 167 and 168: Appendix C: The Status Menu The fol
Page 169 and 170: Half H Full F None N Data Bits DOTS
Page 171 and 172: Word Wrap W-CHORD End Display on Ca
Page 173 and 174: The following page format parameter
Page 175 and 176: TELECOMMUNICATIONS QUESTIONS APPEND
Page 177 and 178: Answer: You need to set the Interac
Page 179 and 180: R to receive" and if I press an S-C
Page 181 and 182: with an E-CHORD. Now, you should be
Page 183 and 184: when exchanging your Braille Lite f
Page 185 and 186: is off-limits around the Braille di
Page 187 and 188: Question: How and when can I use "w
Page 189 and 190:
tend to group their program files i
Page 191 and 192:
Appendix E: ASCII Braille Symbols T
Page 193 and 194:
Data Line Escape 16 CTRL-P Decimal
Page 195 and 196:
j, lowercase 106 DOTS 2-4-5 K, Uppe
Page 197 and 198:
Reverse Slant, (backslash) 92 DOTS
Page 199 and 200:
Appendix F: Contact Information Tha
Page 201 and 202:
Index Abort........................
Page 203 and 204:
Character..........................
Page 205 and 206:
Reading............................
Page 207 and 208:
Interactive Timeout parameter......
Page 209 and 210:
Printing...........................
Page 211 and 212:
Braille Display Mode ..............
show all

The Braille Lite M20-M40 User's Manual - Freedom Scientific

Create successful ePaper yourself

Delete template?

Save as template?