The Braille Lite M20-M40 User's Manual - Freedom Scientific

setting will not take effect until you turn Voice
Inflection back on in the Status Menu.
Note: Be sure to point to an item other than
PC Edit when pressing I in the Status
Menu.
Voice Pitch
You can adjust voice pitch. After entering
Speech Parameters, use DOTS 2-3 (decreases)
or DOTS 5-6 (increases) to adjust the voice
pitch.
Line Breaks
Press L to toggle between Speak to “End of
Line” or “End of Sentence” (line is default).
Speak to End of Line pauses for punctuation
and/or line breaks; Speak to End of Sentence
pauses for punctuation, but not for line breaks.
You might use Speak to End of Line for reading
the help file, for example, and Speak to End of
Sentence for reading a novel.
Preset Voices
You can preset five voices using all available
Speech Parameters. Press DOTS 2-3 CHORD or
DOTS 5-6 CHORD to select a voice number (i.e.,
voice number 1, voice number 2…) then use the
different parameters to customize the voice.
When you are ready or are in a situation where
you need a different voice, press a Y-CHORD and
the voice number (in dropped numbers) from
Part# 440013-001 Rev. D 29