The Braille Lite M20-M40 User's Manual - Freedom Scientific

Parameter=size (default value is 0; set message
size limit in KB; see discussion of interactive
size mode; 0 is unlimited)
SMTP section:
Parameter=server IP (allows you to define SMTP
server IP address)
Parameter=server name (SMTP server name;
not necessary if IP address has been defined)
Parameter=email (outgoing email address)
Checking for new E-mail
Run the Mailer.bns program to check for new email:
15. Press O-CHORD, F to enter the File Menu.
16. Navigate to the Mailer.bns program with
either the Whiz Wheels or by using DOT 1
or DOT 4 CHORD.
17. Press O-CHORD to run the Mailer.bns
program.
As the program is running you will hear the
modem dial out, a sequence of beeps, and
progress messages that are dependant on your
unit’s settings.
For example, if Interactive Size Mode is on and
you are downloading a message that is over the
size you have defined, you will hear the prompt,
"Message X psize in bytes is over the limit.
Press E-CHORD to download, Z-CHORD to skip,
Part# 440013-001 Rev. D 129