download PDF - Gammill

104
Getting Started with CreativeStudio
3. Click Stop when done and CS will erase everything outside the boundary.
Tip: CS hasn't really deleted any of the pattern. It just won't sew
outside of your boundary. Therefore, you can click inside your
boundary to select the pattern and reposition it or resize it until it
fits perfectly.
4. Reposition the pattern image. Click on the pattern(s) to select if needed. Use
the handles (blue) to re-size 77 , rotate 78 and reposition 78 the pattern so it aligns to
the Trim boundary. Save the project 60
.
5. Click on Start_Quilting