download PDF - Gammill

142
Getting Started with CreativeStudio
Save the project 60 .
12. Click Quilt The machine moves to the start of the pattern, takes a
single stitch and prompts you to pull up the bobbin, so do that. Press OK on the
keypad when ready. The first row of the new section now begins.
13. At the end of the row, CS stops and prompts you to cut the bobbin thread and
click OK.
IF you have room for another row, The machine moves to the beginning of the
next row and begins again. Continue quilting until the entire current section is done.
14. When done with the last row that will fit the current area, CS will again prompt for
marking registration points. Repeat steps #7 - #14 until the last section - when
bottom edge of the quilt makes its way up to the current quiltable space.
15. Last Section adjustments are often necessary so the last time you roll the quilt,
the prompts are a little different.
Save the project 60
.
16. Click Quilt The machine moves to the start of the pattern, takes a
single stitch and prompts you to pull up the bobbin, so do that. Press OK on the
keypad when ready. The first row of the new section now begins.
17. At the end of the last row, CS stops and prompts you to cut the bobbin thread
and click OK.